JUAL SLIP ON FLANGE
Jual Slip On Flange
Jual Slip on flange are typically provided with a raised or flat face. When a raised face is necessary for slip on pipe flanges, the standard height is 1/16 inch for slip on pipe flanges fewer than 400#. For slip on pipe flanges of 400# and up, the standard slip on pipe flange raised face height is 1/4 inch.
The slip-on flange is positioned so the inserted end of the pipe or fitting is set short of the flange face by the thickness of the pipe wall plus 1/8 of an inch, which thus allows for a fillet weld inside the SO flange equal without doing any damage to the flange face. The back or outside of the slip-on flange or SO flange is also welded with a fillet weld.
Jual slip on flange
Spesification Slip On Neck Flange
Material | Alloy steel (ASTM A234 WP12/ WP11/ WP22/ WP5/ WP9/ WP91) Stainless steel (ASTM A403 WP304/ WP304L/ WP316/ WP316L) Carbon steel (ASTM A234WPS, A234WPC, A420 WPL6), St45.8 A105 A106 STG42) |
Standard | ANSI, B16.9, ASME, DIN2650, 2615, 2616, 2617, JIS B2311, 2312, 2313, EN 10253-11, EN10253-2 |
Type | LR 30, 45, 60, 90, 180 degree SR 30, 45, 60, 90, 180 degree 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D |
Thickness | SCH5, SCH10, SCH20, SCH30, SCH STD, SCH40, SCH60, SCH XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS |
Size | 1/2-80 inch (DN15-DN2000) |
Surface treatment | Anti-rust Oil, Transparent/ Yellow/ Black Anti-rust Paint, Zinc, |
Hot dipped Galvanized. | |
Inspection | Factory in-house self check or Third Party inspection |
Packing | Wooden case, pallet or as customers’ requirement |
Applications | Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
Heat Treatment | Normalizing, Annealing, Quenching+Tempering |
jual flange slip on, distributor flange slip on, stockist flange slip on, flange slip on stainless steel, flange slip on cast steel, flange slip on carbon steel, jasa pembuatan flange slip on, daftar harga flange slip on,