Knife Gate Valve | DT (Ser. 80) Double Gate | ORBINOX
Distributor ORBINOX Indonesia
MODEL |
DT |
SERIES 80 |

DOUBLE GATE KNIFE GATE VALVE |
The DT model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated media. In the open position, both gates are retracted into the body, assuring full flow. When the gates close, they push stock and contaminants as staples, wires, etc., out of the body and back into the flow. As a result of this double gate design, the stroke time of these valves is half of that of the conventional valves. All components subject to wear can be easily replaced.
Sizes : | DN 100 to DN 600 (larger diameters on request) |
Working pressure:
DN 100 to DN 250 DN 300 to DN 400 DN 450 DN 500 to DN 600 |
10 bar 6 bar 5 bar 4 bar |
Standard flange connection:
DIN PN 10 and ANSI B16.5 (class 150) Note: other flange connections are available on request |
Option: For the square outlet, ORBINOX can also design a square-to-round transition piece.
Directives: Knife Gate Valve DT Ser 80 Double Gate ORBINOX |
2006/42/CE (MACHINES) 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A) 2014/34/EU (ATEX) |
All valves are tested prior to shipping in accordance with the standard developed by the Quality Control Department at ORBINOX.
STANDARD PARTS LIST |
PART | CARBON STEEL | STAINLESS STEEL |
BODY | Carbon steel | AISI 316 |
COUNTERBODY | Carbon steel | AISI 316 |
GATE | AISI 304 | AISI 316 |
PACKING | PTFE Impreg. Synth. Fibre (both with an EPDM o-ring) | |
GLAND FOLLOWER | Carbon steel | AISI 316 |
YOKE | Carbon Steel-Epoxy Coated | |
SEAT RINGS | CF8M | |
BODY LINER | HMW Polyethylene | |
“O” RING | Nitrile |
jual Knife Gate Valve DT Ser 80 Double Gate ORBINOX
DOWNLOAD :
• Catalogue (Metric)
• Catalogue (Imperial)
• Datasheet (Metric)
• Datasheet (Imperial)
• Manual