ORBINOX INDONESIA-Jual Knife gate valve
Distributor ORBINOX Indonesia

ORBINOX

PRODUCT FEATURES

ORBINOX INDONESIA-Jual Knife gate valve

The world’s leading of Knife Gate Valves.

ORBINOX are present in more than 70 countries worldwide with over 50 years of experience designing, manufacturing and distributing knife gate valves.
ORBINOX have highly qualified and experienced offer the most comprehensive solutions to customers needs.
ORBINOX Quality Assurance System covers all steps (from design to after sales service) in accordance with ISO 9001.


Discover all about ORBINOX products and get the catalogues and manuals you need



EX (SER.10) – UNIDIRECTIONAL _Jual Knife Gate Valve_ORBINOX


ORBINOX EX (SER.10) Unidirectional


The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries.

SIZES : DN 50 to DN 1200
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 250: 10 kg/cm2
DN 300 to DN 400: 6 kg/cm2
DN 450: 5 kg/cm2
DN 500 to DN 600: 4 kg/cm2
DN 700 to DN 1200: 2 kg/cm2
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150)
Note: other flange connections (on request):
EN1092 PN6/16/25
BS D and E
ANSI 125
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



EK – UNIDIRECTIONAL-HIGH PERFORMANCE _Jual Knife Gate Valve_ORBINOX


ORBINOX - EK - Unidirectional-High performance


The EK model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries.

SIZES : DN 50 to DN 1200
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 125: 16 bar
DN 150 to DN 250: 10 bar
DN 300 to DN 400: 6 bar
DN 450: 5 bar (1)
DN 500 to DN 600: 4 bar(1)
DN 700 to DN 1200: 2 bar(1)6 bar with duplex gate
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150).
Note: other flange connections are available on request such as:
EN1092 PN6/16/25
BS “D” and “E”
ANSI 125
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



ET (SER.20) – UNIDIRECTIONAL-MSS SP-81 _Jual Knife Gate Valve_ORBINOX


Knife Gate Valve - ORBINOX - ET (SER.20) - UNIDIRECTIONAL-MSS SP-81


The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service applications.
The design of the body and seat assures non-clogging shutoff on suspended solids in industries.

SIZES : DN 2″/50 to DN 36″/900
(larger diameters on request).
Harga Knife Gate Valve
WORKING PRESSURE :
DN 2″/50 to 24″/600: 150 psi (10 kg/cm²)
DN 30″/750: 100 psi (7 kg/cm²)
DN 36″/900: 100 psi (7 kg/cm²)
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150)
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



EB (SER.11) – BIDIRECTIONAL _Jual Knife Gate Valve_ORBINOX


Knife Gate Valve - ORBINOX - EB (SER.11) - BIDIRECTIONAL


The EB model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries.

SIZES : DN 50 to DN 1200
(larger diameters on request).
Harga Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 250 : 10 kg/cm²
DN 300 to DN 400 : 6 kg/cm²
DN 450 : 5 kg/cm²
DN 500 to DN 600 : 4 kg/cm²
DN 700 to DN 1200 : 2 kg/cm²
STANDARD FLANGE CONNECTION :
EN1092 PN10
Face to face dimensions acc. EN558-1 serie20 (DIN3202 K1) up to DN 500.
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



BT (SER.22) – BIDIRECTIONAL-MSS SP-81 _Jual Knife Gate Valve_ORBINOX


Knife Gate Valve - ORBINOX - BT (SER.22) - BIDIRECTIONAL-MSS SP-81


The BT model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and seat assures non-clogging shut off on suspended solids in industries.

SIZES : DN 2″/50 to DN 24”/600
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 2″/50 to DN 24”/600: 150psi / 10kg/cm2
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
ANSI B16.5 (class 150)
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



BR – BIDIRECTIONAL _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife gate valve - EX (SER.10) - Unidirectional


The BR model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended solids in industries.

SIZES : DN 50 to DN 600mm
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 250: 10kg/cm2
DN 300 to DN 400: 6kg/cm2
DN 450: 5kg/cm2
DN 500 to DN 600: 4kg/cm2
STANDARD FLANGE CONNECTION :
DIN PN 10 and ANSI B16.5 (class 150)
Other flange connections available on request
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



HB – BIDIRECTIONAL – HIGH PRESSURE _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - HB - BIDIRECTIONAL - HIGH PRESSURE


The HB model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries.

SIZES : DN 50 to DN 300
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 300: 16 kg/cm²
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
DIN PN 16 (Others on request)Face to face dimensions acc. EN558-1 serie20 (DIN3202 K1) up to DN 500.
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



TL (SER.30) – THROUGH CONDUIT _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - TL (SER.30) - THROUGH CONDUIT


The TL model knife gate is a through conduit wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries.

SIZES : DN 50 to DN 1000
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 125: 10 (kg/cm²)
DN 150 to DN 250: 8 (kg/cm²)
DN 300 to DN 400: 6 (kg/cm²)
DN 450: 5 (kg/cm²)
DN 500 to DN 600: 4 (kg/cm²)
DN 700 to DN 1000: 2 (kg/cm²)
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150)
Note:
other flange connections are available on request such as:
EN1092 PN6/16/25
BS D and E
ANSI 125
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



TK – THROUGH CONDUIT-HIGH PERFORMANCE _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - TK - THROUGH CONDUIT-HIGH PERFORMANCE


The TK model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries.

SIZES : DN 80 to DN 600
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 80 to DN 250: 10 bar
DN 300 to DN 600: 6 bar (1)
Distributor Knife Gate Valve di jakarta
(1) 8 bar with duplex gate
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
DIN PN 10
Note: other flange connections (on request):
ANSI B16.5 (class 150)
DIN PN 6
DIN PN 16
DIN PN 25
BS “D” and “E”
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



TH – THROUGH CONDUIT – HIGH PRESSURE _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - TH - THROUGH CONDUIT - HIGH PRESSURE


The TH model knife gate is a through conduit high pressure wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or reverse flow. The valve is used in a wide range of demanding applications in industries.

SIZES : DN 300 to DN 1000
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 300 to DN 800: 10 (kg/cm²)
DN 900 to DN 1000: 6 (kg/cm²)
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
DIN PN10
Note:
other flange connections are available on request such as:
EN1092 PN6/16/25 OR ansi B16.5
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



CR (SER.70) – ROUND AND SQUARE PORT _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - CR (SER.70) - ROUND AND SQUARE PORT


The CR model knife gate is a heavy duty valve designed for handling difficult applications. This valve is suitable for use in recycle applications, like junk or sand traps of pulpers, high consistency cleaner (HDC) or as silo outlet with solid material.
The two piece body with round inlet and square outlet (larger than the inlet) assures non-jamming.

SIZES : DN 100 to DN 600
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 100 to DN 400: 7 kg/cm²
DN 500 to DN 600: 4 kg/cm²
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150) /on valve inlet only
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group I(b), II (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



DT (SER.80) – DOUBLE GATE _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - DT (SER.80) - DOUBLE GATE


The DT model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated media. In the open position, both gates are retracted into the body, assuring full flow. When the gates close, they push stock and contaminants as staples, wires, etc., out of the body and back into the flow. As a result of this double gate design, the stroke time of these valves is half of that of the conventional valves. All components subject to wear can be easily replaced.

SIZES : DN 100 to DN 600
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 100 to DN 250: 10 kg/cm²
DN 300 to DN 400: 6 kg/cm²
DN 450: 5 kg/cm²
DN 500 to DN 600: 4 kg/cm²
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150)
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)
ORBINOX INDONESIA-Jual Knife gate valve



VG (SER.61) – SLURRY VALVE _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - VG (SER.61) - SLURRY VALVE


The VG model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve body and the two rubber sleeves makes the VG valve suited for use in handling abrasive slurries in industries.

SIZES : DN 50 to DN 900
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to DN 400: 10 bar
DN 450 to DN 600: 6 bar o 10 bar
DN 700 to DN 900: 5 bar
Note: higher working pressures on request.
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150)
Standard face to face: see the catalogue
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



WG (SER.65) – SLURRY VALVE _Jual Knife Gate Valve_ORBINOX


ORBINOX - KNIFE GATE VALVE - WG (SER.65) - SLURRY VALVE


The WG (SER.65) model knife gate is a bi-directional full flanged valve equipped with two metal reiforced rubber sleeves designed for use in the handling of abrasive slurries, maily in industries.

SIZES : DN 80mm/3″ to DN 600mm/24″
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 80mm/3″ to DN 400mm/16″: 10 bar (150psi)
DN 450mm/18″ to DN 600mm/24″: 6 bar(90 psi) o 10 bar(150 psi)
Note: higher pressures and/or diameters on request.
STANDARD FLANGE CONNECTION :
DIN PN10 and ANSI B16.5 (class 150)
Standard face to face: see the catalogue
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



HG (SER.68) – SLURRY VALVE _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - HG (SER.68) - SLURRY VALVE


The HG (SER.68) model knife gate is a bi-directional full flanged heavy duty valve equipped with two metal reiforced rubber sleeves designed for use in the handling of abrasive slurries, maily in industries.

SIZES : DN 80mm/3″ to DN 600mm/24″
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 80mm/3″ to DN 600mm/24″: 20 bar (300psi)
Note: higher pressures and/or diameters on request.
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
DIN PN25 (EN 1092-2) and ANSI B16.5 (class 300)
Standard face to face: see the catalogue
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



XC (SER.14) – HOPPER SHAPE SILO OUTLET _Jual Knife Gate Valve_ORBINOX


ORBINOX - KNIFE GATE VALVE - XC (SER.14) - HOPPER SHAPE SILO OUTLET


The XC model knife gate is a wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the body allows for easy passage of the fluid and makes it ideal for use as silo outlet valve. Widely used in industries.
Valve is usually installed under silos or hoppers in vertical pipes with the seat in the upstream side of the valve in order to protect it from the solids flow. This set up helps to protect the seat from premature wear and gate jamming due to solid build-up.

SIZES : DN 50 to DN 600
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 50 to 250: 10 kg/cm²
DN 300 to 400: 6 kg/cm²
DN 450: 5 kg/cm²
DN 500 to 600: 4 kg/cm²
STANDARD FLANGE CONNECTION :
EN1092 PN10 and ANSI B16.5 (class 150)
Note: other flange connections are available on request.
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)



BC (SER.90) – SQUARE PORT _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - BC (SER.90) - SQUARE PORT


The BC model knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries.

SIZES : From DN 150 x 150 to DN 600 x 600
(larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
150 x 150 to 600 x 600: 1 kg/cm²
For higher pressure: Casted bodies (on request)
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve



BX – COAL BURNER ISOLATION (ATEX CAT.1) _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - BX - COAL BURNER ISOLATION (ATEX CAT.1)


The BX model knife gate is a bi-directional wafer valve specifically designed for the isolation of pulverized coal burner lines on coal fired boilers during maintenance. The valve is dust tight which makes it suitable for other bulk handling applications, such as silo outlet valves. This valve has been designed for use in potentially explosive areas (ATEX) and it complies with DIN EN 14460 (Explosion resistant equipment). In the closed position, the valve can be used as an effective measure against flame propagation in the event of an explosion.

SIZES : DN 700 to DN 1000
(Smaller and larger diameters on request).
Jual Knife Gate Valve
WORKING PRESSURE :
DN 700 to DN 1000: 3 bar
Jual Knife Gate Valve
STANDARD FLANGE CONNECTION :
DIN PN 10
ORBINOX INDONESIA-Jual Knife gate valve
ORBINOX INDONESIA-Jual Knife gate valve
DIN EN 14460 (DN 700-1000)
Valve housing resistance to explosion pressure and ignition disrupting resistance against St1 dust explosion in closed position:
DN700-800: 9,6 bar
DN900-1000:10,5 bar
*IMPORTANT: Pressure rating of the valve refers to maximum working pressure of the valve. The maximum explosion pressure exceeds many times the working pressure, so 94/9/EC limits must always be observed



CX – COAL BURNER ISOLATION (NFPA 85) _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - CX - COAL BURNER ISOLATION (NFPA 85)


The CX model knife gate valve is an uni-directional full-flange knife gate valve specially designed to isolate pulverized coal burner lines in coal fired power plants. The design of these valves follows the NFPA 85 requirements.

SIZES : DN 200/8″ to DN 900/36″
(larger diameters on request).
Jual Knife Gate Valve
DESIGN PRESSURE :
Exceeds 3,5 kg/cm2 (50 psi) following NFPA 85
STANDARD FLANGE CONNECTION :
DIN PN10 and ANSI B16.5 (class 150)
Distributor Orbinox Indonesia
DIRECTIVES :
DIR 2006/42/CE (MACHINES)



AT – UNIDIRECTIONAL-SPLIT BODY _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - AT - UNIDIRECTIONAL-SPLIT BODY

Cast or fabricated construction and precise gate guiding inside the body make this valve a perfect choice for demanding applications (transport of very heavy fluids, food industry…).
Distributor Resmi ORBINOX VALVE INDONESIA
SIZES : DN 50 (2”) to 1000 mm (40”)
ORBINOX INDONESIA-Jual Knife gate valve
WORKING PRESSURE : Up to 10 bar, depending on size.
ORBINOX INDONESIA-Jual Knife gate valve
ACTUATORS : Handwheel, Pneumatic, Electric or Hydraulic

ORBINOX INDONESIA-Jual Knife gate valve



VP – BIDIRECTIONAL-SPLIT BODY _Jual Knife Gate Valve_ORBINOX


ORBINOX - Knife Gate Valve - VP - BIDIRECTIONAL-SPLIT BODY

Cast or fabricated construction and precise gate guiding inside the body make this valve a perfect choice for demanding applications (transport of very heavy fluids, food industry…).
Distributor Resmi ORBINOX VALVE INDONESIA
SIZES : DN 50 (2”) to 700 mm (28”)
Agen Resmi ORBINOX VALVE INDONESIA
WORKING PRESSURE : Up to 10 bar, depending on size.
Jual Knife gate valve ORBINOX di surabaya
ACTUATORS : Handwheel, Pneumatic, Electric or Hydraulic

ORBINOX INDONESIA-Jual Knife gate valve



KP – TRANSMITTER ISOLATIONORBINOX INDONESIA-Jual Knife gate valve


ORBINOX - Knife Gate Valve - KP - TRANSMITTER ISOLATION


Orbinox KP valve provides isolation of an instrument level transmitter from a storage tank. Installation of this valve allows for transmitter replacement or maintenance without disruption of the process or draining of the vessel.

SIZES : DN 80
ORBINOX INDONESIA-Jual Knife gate valve
STANDARD FLANGE CONNECTION :
PN10 / ANSI 150
ORBINOX INDONESIA-Jual Knife gate valve
TANK SIDE :
see pag. 4
WORKING PRESSURE :
DN80: 10 bar
ORBINOX INDONESIA-Jual Knife gate valve
DIRECTIVES :
DIR 2006/42/CE (MACHINES)
DIR 2014/68/EU (PED) Fluid: Group 1(b), 2 (Cat. I, mod. A)
DIR 2014/34/EU (ATEX)